Description
• Replacement surge protection module for the PWD50-EPO or PWD50-EPO-H unit
(NOT FOR PWD50 UNIT)
• Simple installation – only a Phillips screw driver is needed. NO SOLDERING
• New 4,800 Joules Surge Protection Module.
INSTRUCTIONS
• Simply unscrew the 8 Phillips screws on the back of the unit. Unscrew the top and bottom cable gland nuts. Unscrew the screws holding the old module. Unplug the old/used up surge module from the unit. Connect in the new surge protection module. Replace all the screws, re-tighten the cable gland nuts.
CAUTION!
• Make sure unit is unplugged before installation!
PART NUMBER: 45906
Additional Information
Weight | 0.5 lbs |
---|