Description
• Replacement surge protection module for the PWD30 unit. (NOT for EPO version).
• Simple installation – only a Phillips screw driver is needed. NO SOLDERING
• New 2,400 Joules Surge Protection Module.
INSTRUCTIONS
• Simply unscrew the 8 Phillips screws on the back of the unit. Unscrew the top and bottom cable gland nut. Unscrew the screws holding the old module. Unplug the old/used up surge module from the unit. Connect in the new surge protection module. Replace all the screws and re-tighten the cable gland nuts.
CAUTION!
• Make sure unit is unplugged before installation!
PART NUMBER: 45876
Additional Information
| Weight | 0.5 lbs |
|---|
